Roll over image to zoom in
ATmega328P-U Microcontroller
₹230.00 Excl. GST 18%
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- On-chip 2-cycle multiplier
- True read while write operation
- Up to 16MIPS throughput at 16MHz
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
✔ Shipping Charge Only Rs.49
✔ Free Delivery on all Orders Above Rs.999
✔ All Orders Shipped within 24 Hours
✔ GST Input Tax Credit is available
Arduino UNO uses ATMEGA328P-U microcontroller and this controller comes pre-loaded with a Arduino UNO bootloader. Basically bootloader is a little piece of code that allows you to program the flash memory of the Arduino’s atmega328p via serial or USB instead of using an ICSP programmer.
If you are making a project based on Arduino UNO & you have made a customized PCB then you will be requiring bootloaded Atmega328P-U microcontroller. This is a ATmega328P-U in DIP package, pre-loaded with the Arduino (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. You should select the Arduino UNO board within the Arduino IDE.
The ATmega328P-U AVR is supported with a full suite of program and system development tools including C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation Kits.
Package Includes:
1 x ATmega328P-U Microcontroller
*Product Images are shown for illustrative purposes only and may differ from actual product.
Reviews
There are no reviews yet.