-
- On-board level shift circuit.
- Arduino UNO R3 and the compatible board can directly connect to this module.
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit).
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator).
- Working current: 240mA(MAX).
₹110.00 Excl. GST 18%
-
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
₹128.00 Excl. GST 18%
-
- LDR Light Sensor on board.
- WS2812 Led on board.
- Includes CH340G USB-to-UART programmer.
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
- Supports 3 modes: AP, STA, AP+STA.
- Dimensions: 24mm x 16mm.
- Micro USB connection for power and/or programming.
₹399.00 Excl. GST 18%
-
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ +125°C
- Flash size: 4MByte
- Lowest cost WI-FI
₹225.00 Excl. GST 18%
-
- RTL8188cus Chipset
- Mini portable USB 2.0 design.
- Wireless N speed up to 150Mbps, ideal for internet surfing and online gaming.
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
- MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
- 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card.
₹260.00 Excl. GST 18%
-
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
₹295.00 Excl. GST 18%
