-
65mm Robot Wheel for BO Motors (Red)
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Red
₹45.00 Excl. GST 18% -
65mm Robot Wheel for BO Motors (Yellow)
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
₹39.00 Excl. GST 18% -
A3967 Stepper Motor Driver Module
- Power supply: 7V to 30V.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
₹160.00 Excl. GST 18% -
A4988 Stepper Motor Driver Module
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
₹80.00 Excl. GST 18% -
Ball Castor Wheel Small
- Base plate diameter: 27.5mm
- Castor wheel diameter: 13.5mm.
- Wheel height: 18mm
- Ball Material: Steel.
- Cap Material: Plastic.
- Weight: 15 gm.
- Load Capacity: 5 kg
₹24.00 Excl. GST 18% -
BO Wheel 7cm Dia. x 1cm Width (Pack of 2)
- Shaft Diameter : 6 mm.
- Wheel Diameter : 75 mm.
- Wheel Width : 12 mm.
- Loading Capacity : 2 kg.
- Color : Red.
₹38.00 Excl. GST 18% -
DC 3-6V Mini Micro Submersible Water Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
₹54.00 Excl. GST 18% -
DC Motor Mobile Phone Vibration Motor Alarm Module
- Rated voltage: 5 VDC.
- Port: Digital quantity.
- Fixed hole:3mm.
- Pitch:15mm.
- Drive: MOS tube high-level trigger, low-level cutoff.
- Compatible with UNO R3/ Mega2560.
₹135.00 Excl. GST 18% -
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
- Operating Voltage: DC 4.8-6V.
- Offer 3 modes to check servos or ESC.
- The Neutral mode makes the servo go back to the neutral point.
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time.
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible.
- Connect to up to 3 servos simultaneously.
₹130.00 Excl. GST 18%Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
₹130.00 Excl. GST 18% Add to cart -
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
₹149.00 Excl. GST 18% -
Flat 1034 Mobile Phone Vibrator Motor
- Voltage Range: DC 2.5-4V.
- Motor Diameter: 10 mm.
- Motor Thickness: 3.4 mm.
- Min. Rated Speed: 9000RPM
- Max. Rated Current: 90mA
₹65.00 Excl. GST 18% -
Futaba S3003 Servo Motor 3.2Kg/cm Torque
- Model: Futaba S3003
- Operating Voltage: 4.8V~ 6.0V
- Operational Current: 100mA
- Servo Plug: JR
- Stall torque (4.8V) : 3.2Kg-Cm
- Stall torque (6.0V) : 4.1Kg-Cm
- Weight: 37 gm
₹320.00 Excl. GST 18% -
L293D Motor Driver Module
- Maximum motor supply voltage: 36V
- Maximum motor supply current: 600 mA per motor
- Screw terminal connectors for easy motor connection.
- L293D motor driver IC.
- Male burg stick connectors for supply, ground and input connection
- High noise immunity inputs.
₹85.00 Excl. GST 18% -
L298 2A Dual Motor Driver Module with PWM Control
- Logical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
₹115.00 Excl. GST 18% -
L9110S H-Bridge DC Stepper Motor Driver Module
- Power supply voltage: DC 2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- Control and drive integrated into IC
- Have pin high-pressure protection function
- TTL/CMOS output level compatible can be connected directly to the CPU
₹75.00 Excl. GST 18% -
Mounting Clamp for BO Motor (Pack of 2)
- Material: MS steel.
- Thickness: 1mm.
- Mounting Hole: 3mm.
₹24.00 Excl. GST 18% -
N20 12V 200 RPM Micro Metal Gear Motor
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Light Weight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
₹235.00 Excl. GST 18% -
N20 12V 60 RPM Micro Metal Gear Motor
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Light Weight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
₹235.00 Excl. GST 18% -
R385 6-12V DC Diaphragm Based Mini Aquarium Water Pump
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Recommended voltage ratings are 9v 1A or 12v 1A.
- Maximum suck range of 2m.
- The maximum head range of 3m.
- Works with liquids of up to 80°C.
- The maximum flow rate of up to 1 – 3L/min.
₹179.00 Excl. GST 18% -
Robot Wheel 10cm Dia. x 2cm Width
- Shaft Diameter: 6mm
- Wheel Diameter: 10cm (100mm)
- Wheel Width: 2cm (20mm)
- High-Quality Material
- Light-Weight and Durable
- Smooth Surface
₹54.00₹75.00Excl. GST 18% -
Robot Wheel 7cm Dia. x 2cm Width
- Shaft Diameter: 6mm
- Wheel Diameter: 7cm
- Wheel Width: 2cm
- Weight: 34gm
₹29.00 Excl. GST 18% -
Robot Wheel 7cm Dia. x 4cm Width
- Shaft Diameter: 6mm
- Wheel Diameter: 7cm
- Wheel Width: 4cm
₹45.00 Excl. GST 18% -
Small Castor Wheel for Robot
- Dimensions: 35 x 25 mm (Diameter x Height)
- Body Case Material: Plastic
- Weight: 15 gm
- Ball Material: 304 Stainless Steel
- Application: for MiniQ robot
₹35.00 Excl. GST 18% -
TB6612FNG Dual Motor Driver Module 1A for Arduino
- Operating Voltage: 15V DC
- Peak Current: 3.2A
- Continuous Current: 1.2A
- No. of Channels: 1
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
₹390.00 Excl. GST 18% -
TowerPro MG945 Digital High Speed Servo Motor (180° Rotation)
- High quality
- Servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
- CE & RoHS approved
- Servo gear set and shaft have been upgraded to aluminum 6061-T6,which is stronger and lighter than copper.
- Universal “S” type connector,fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum
₹510.00 Excl. GST 18%
Shop By Department
- Boards & Programmers
- Drone Parts
- Electronic Components
- Basic Electronic Components
- Buttons & Switches
- Buzzer & Speaker
- Connectors
- Breadboard and Zero PCBs
- Microcontroller ICs
- Semiconductor ICs
- Indicator and Displays
- Instruments & Tools
- Power Supply
- Robotics
- Sensors & Modules
- Modules
- Sensors
- Accelerometers
- Color Sensors
- Distance Sensors
- ECG, Pulse & Heart Beat Sensors
- Flex Sensors
- Gas Sensors
- Hall Sensors
- LDR & Light Sensors
- Load Cell Weight Sensor
- Magnetic Sensors
- IR and PIR Sensors
- Pressure Sensors
- Soil Moisture & PH Sensors
- Sound Sensors
- Temperature & Humidity Sensors
- Touch Sensors
- Water Flow & Rain Drop Sensors
- Wires and Cables
- 3D Printers and Parts