-
1.8V-12V 2A DC Motor PWM Speed Regulator
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
₹95.00 Excl. GST 18% -
A3967 Stepper Motor Driver Module
- Power supply: 7V to 30V.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
₹160.00 Excl. GST 18% -
A4988 Stepper Motor Driver Module
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
₹80.00 Excl. GST 18% -
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
- Latest Arduino CNC Shield Version 3.10.
- Coolant enable.
- Compact design.
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals).
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13).
- 2 x End stops for each axis (6 in total).
₹135.00 Excl. GST 18% -
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
₹149.00 Excl. GST 18% -
L293D Motor Driver Module
- Maximum motor supply voltage: 36V
- Maximum motor supply current: 600 mA per motor
- Screw terminal connectors for easy motor connection.
- L293D motor driver IC.
- Male burg stick connectors for supply, ground and input connection
- High noise immunity inputs.
₹85.00 Excl. GST 18% -
L293D Motor Driver Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer.
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution).
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹135.00 Excl. GST 18% -
L298 2A Dual Motor Driver Module with PWM Control
- Logical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
₹115.00 Excl. GST 18% -
L9110S H-Bridge DC Stepper Motor Driver Module
- Power supply voltage: DC 2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- Control and drive integrated into IC
- Have pin high-pressure protection function
- TTL/CMOS output level compatible can be connected directly to the CPU
₹75.00 Excl. GST 18% -
TB6612FNG Dual Motor Driver Module 1A for Arduino
- Operating Voltage: 15V DC
- Peak Current: 3.2A
- Continuous Current: 1.2A
- No. of Channels: 1
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
₹390.00 Excl. GST 18% -
ULN2003 Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1/64
- Reduction ratio: 1/64
- Phase: 4
- Current / Phase: 5V
₹49.00 Excl. GST 18%
Shop By Department
- Boards & Programmers
- Drone Parts
- Electronic Components
- Basic Electronic Components
- Buttons & Switches
- Buzzer & Speaker
- Connectors
- Breadboard and Zero PCBs
- Microcontroller ICs
- Semiconductor ICs
- Indicator and Displays
- Instruments & Tools
- Power Supply
- Robotics
- Sensors & Modules
- Modules
- Sensors
- Accelerometers
- Color Sensors
- Distance Sensors
- ECG, Pulse & Heart Beat Sensors
- Flex Sensors
- Gas Sensors
- Hall Sensors
- LDR & Light Sensors
- Load Cell Weight Sensor
- Magnetic Sensors
- IR and PIR Sensors
- Pressure Sensors
- Soil Moisture & PH Sensors
- Sound Sensors
- Temperature & Humidity Sensors
- Touch Sensors
- Water Flow & Rain Drop Sensors
- Wires and Cables
- 3D Printers and Parts