Electronic components like Resistors, Capacitors, Inductors, Connectors, Semiconductor ICs, Relays form the backbone of all the technological advances today. With these, you can design any system, any model for your project. As the saying goes “You want it, we got it” and we at RoboComp take extra pride in providing the highest quality products to fulfill your ideas at the best price. All products are shipped within 24 hours and delivered right to your doorstep with the minimum shipping charges.
-
120 Ohm 1/4W Metal Film Resistor (Pack of 10)
- Resistance: 120 Ohm
- Max. Working Voltage: 250 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
₹4.00 Excl. GST 18% -
120K Ohm 1/4W Metal Film Resistor (Pack of 10)
- Resistance: 120K Ohm
- Max. Working Voltage: 250 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
₹4.00 Excl. GST 18% -
120uF 50V Through Hole Electrolytic Capacitor (Pack of 3)
- Capacitance: 120uF
- Voltage: 50V
- Operating temperature: -40ºC to 125ºC
- Type: Through-hole electrolytic
₹18.00 Excl. GST 18% -
12K Ohm 1/4W Metal Film Resistor (Pack of 10)
- Resistance: 12K Ohm
- Max. Working Voltage: 250 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
₹4.00 Excl. GST 18% -
12mm Heat Shrink Sleeve Tube Black 1 Meter
- Diameter: 12mm
- Color: Black
- Length: 1 meter
- Shrink Ratio: 2:1
- Elongation Ratio: ≥200%
- Tensile Strength: ≥10.4Mpa
- Radial Shrinking Ratio: ≥50%
- Operating Temperature (°C): -40 to 125
₹36.00 Excl. GST 18% -
12V 250mW Zener Diode (Pack of 5)
- Zener Voltage Range (V): 11.4 – 12.7
- Reverse Leakage Current (μA): < 0.1
- Storage Condition: -65 to 175°C
₹8.00 Excl. GST 18% -
12V 4010 Cooling Fan for 3D Printer
- Long Connecting Wire
- Perfectly fit on the extruder
- Noiseless Performance
- Good airflow
- Very low Current consumption
- Easy to install and connect.
- Bearing: sleeve bearing and ball bearing
₹69.00 Excl. GST 18% -
12V 500mW Zener Diode (Pack of 3)
- Zener Voltage Range (V): 11.4 – 12.7
- Reverse Leakage Current (μA): < 0.1
- Storage Condition: -65 to 175°C
₹7.00 Excl. GST 18% -
12V 5010 Cooling Fan for 3D Printer
- Long Connecting Wire
- Perfectly fit on the extruder
- Noiseless Performance
- Good airflow
- Very low Current consumption
- Easy to install and connect
₹65.00 Excl. GST 18% -
12V 9025 Cooling Fan
- Long Connecting Wire
- Noiseless Performance
- Good airflow
- Very low Current consumption
- Easy to install and connect.
- Bearing: sleeve bearing and ball bearing
- Dimensions: 90x90x25mm
₹155.00 Excl. GST 18% -
12V Active Electromagnetic Buzzer
- Input Voltage(Max.) : 5 – 12VDC
- Resistance: 120 Ω
- Resonance Frequency: 2500 Hz
- Sound pressure(dB(A)/10cm)min.: 85
- Body Size : 12 x 9.5mm
- Pin Pitch: 6mm
- External Material: Plastic
- Color: Black
₹14.50 Excl. GST 18% -
12x12x12mm Tactile Push Button Switch
- Through-hole design.
- Shaft Shape: Round
- Function: Push to ON
- Middle stroke (1.05mm)
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles realized despite the high operating force
₹8.00 Excl. GST 18% -
12×18 cm Double Sided Universal PCB Prototype Board
- Dimension: 12×18 cm
- Quantity : 1 PCS
- Base Material FR4
- Copper Thickness 1-4 OZ
- Board Thickness 1.6mm
- Min. Hole Size 0.3mm
- PCB Weight: 65 g
- PCB color: Green
₹188.00 Excl. GST 18% -
14 Pin DIP IC Socket Base Adaptor (Pack of 2)
- No. of Pins: 14 pins.
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
₹5.00 Excl. GST 18% -
14 Pin Machined IC Base/Socket (Round Holes)
- 14 pins.
- 2.54 mm Pitch
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
- Current Rating up to 3A
- 2 Rows
- Open Frame
- Solder Tail Termination
- Round Pin
₹8.50 Excl. GST 18% -
14.318Mhz Full-Size Crystal Oscillator HC49/U package
- Frequency: 14.318MHz
- Tolerance: 20%
- Operating Temperature Range: -10°C to +60°C
- Storage Temperature Range: -20°C to +70°C
₹9.00 Excl. GST 18% -
15 Amp DPDT ON-OFF-ON (Center Off) Toggle Switch – Lock Action
- Contact Rating: 15 Amp 250V
- Contact Resistance: <20m ohm
- Insulation Resistance: > 100m ohm
- Ambient Temperature: -25°C to +80°C
- Mounting Arrangement: Panel Mounting , Chassis Mounting
- Electrical Contacts: Bimetal Sliver/Copper
₹99.00 Excl. GST 18% -
15 Ohm 5W Fusible Cement Resistor
- Resistance: 15 Ohm
- Tolerance: 5%
- Power rating: 5W
- Resistor type: Fusible Ceramic Cement Resistor
- Can withstand in high-energy and high voltages at high temperatures
- Reliable and offers a long service life
₹11.00 Excl. GST 18% -
15 pin D-Type connector Female – OEN Make
- Solder cup configuration for longevity.
- Nickel-plated terminals.
- Gold plates pins.
- Good quality.
₹35.00 Excl. GST 18% -
150 Ohm 1/4W Metal Film Resistor (Pack of 10)
- Resistance: 150 Ohm
- Max. Working Voltage: 250 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
₹4.00 Excl. GST 18% -
150 Ohm 2W Carbon Film Resistor (Pack of 5)
- Resistance: 150 Ohm
- Tolerance: ±5%
- Power rating: 2W
- Resistor type: Carbon Film
- Max. operating voltage: 180V to 240V
₹10.00 Excl. GST 18% -
150 Ohm 5W Fusible Cement Resistor
- Resistance: 150 Ohm
- Tolerance: 5%
- Power rating: 5W
- Resistor type: Fusible Ceramic Cement Resistor
- Can withstand in high-energy and high voltages at high temperatures
- Reliable and offers a long service life
₹11.00 Excl. GST 18% -
150pF Ceramic Disc Capacitor (Pack of 5)
- Value: 150pF
- Voltage: 50V
- Pitch: 5mm
- Mounting: Through Hole
- Tolerance: ±10 %
- Polarity: Non-Polarised
- Capacitor type: Ceramic Disc Capacitor
₹3.00 Excl. GST 18% -
15K Ohm 1/4W Metal Film Resistor (Pack of 10)
- Resistance: 15K Ohm
- Max. Working Voltage: 250 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
₹4.00 Excl. GST 18% -
15nF 250V (0.015uF – 153K) Myler Polyester Film Capacitor
- Value: 15nF or 0.015uF
- Voltage: 250V
- Accuracy: ±10%
- Pitch: 10mm
- Operating Temperature Range: -55°C to +125°C
- Material: Polyester Film
₹4.00 Excl. GST 18% -
15pF Ceramic Disc Capacitor (Pack of 5)
- Value: 15pF
- Voltage: 50V
- Pitch: 5mm
- Mounting: Through Hole
- Tolerance: ±10 %
- Polarity: Non-Polarised
- Capacitor type: Ceramic Disc Capacitor
₹3.00 Excl. GST 18% -
15V 250mW Zener Diode (Pack of 5)
- Zener Voltage Range (V): 13.8 – 15.6
- Reverse Leakage Current (μA): < 0.1
- Storage Condition: -65 to 175°C
₹8.00 Excl. GST 18% -
16 Pin DIP IC Socket Base Adaptor (Pack of 2)
- No. of Pins: 16 pins.
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
₹6.00 Excl. GST 18%
