-
4×4 Matrix 16 Button Keypad Keyboard Module
- 4×4 Matrix Keyboard Module with 16 buttons.
- Small in size and hence Save space.
- More convenient to use.
- Expanded development application modules for single chip.
- With 16 keys and 8 pin.
₹58.00 Excl. GST 18% -
4×4 Matrix 16 Push Button Keypad Keyboard Module
- 4×4 Matrix Keyboard Module with 16 buttons
- With 16 keys and 8 pin
- Small in size and hence Save space
- Expanded development application modules for single chip
- Keypad dimensions: 57mm x 33mm x 6mm
₹96.00 Excl. GST 18% -
4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
- Sticker can peel off for adhesive mounting.
- Operating Voltage: 12V DC
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×5 type 20 keys.
- Ultra-thin design & adhesive backing provides easy integration to any project
₹125.00 Excl. GST 18%4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
₹125.00 Excl. GST 18% Add to cart -
5-Channel Flame Sensor Module
- Detecting range: >120 degree.
- Operating Voltage: 3.3V – 9V
- Analog and digital outputs.
- On-board potentiometer and indicators.
- 1% resistors to make this module more reliable and precise.
- Board Diameter: 40 mm.
₹145.00 Excl. GST 18% -
5.1 channel USB Sound Card for Raspberry Pi and Computers
- Plug and Play device no software installation needed.
- Easy and portable.
- Boost the signals for Headsets.
- Works and all major operating systems.
- Supports 5.1 Surround and 3D sound.
- No external power supply needed.
₹134.00 Excl. GST 18% -
5D Rocker Joystick for Arduino, MCU, AVR Game
- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
₹110.00 Excl. GST 18% -
5mm IR Infrared LED
- Diameter: 5mm
- Forward Voltage: 1.2V – 2.3V
- Forward Current: 50mA
- Operating Temperature : -40°C to +100°C
- Wavelength: 940nM
- Lead Spacing: 2.54mm
₹4.50 Excl. GST 18% -
5mm IR Infrared Transmitter and Receiver LED Pair
- Dimensions : 5mm
- Package type: leaded
- Leads with stand-off
- Fast response times
₹12.00 Excl. GST 18% -
5mm LDR Light Dependent Resistor
- Diameter: 5mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +800°C (Approx.)
- Dark Resistance: 1-20 Mohm
₹6.00 Excl. GST 18% -
5V 1 Channel Relay Module without Light Coupling
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
₹70.00 Excl. GST 18% -
5V 2 channel USB PC Intelligent Control Relay Module
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production
₹365.00 Excl. GST 18% -
5V Dual Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage: 3.3V – 5V
- Back EMF protection
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max. 10A
- DC Control Voltage: 30V @max. 10A
₹65.00 Excl. GST 18% -
6 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC.
- Equipped with high-current relay 10A 250VAC / 10A 30VDC.
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection.
- Freewheeling diode to protect your microcontroller.
- Input Signal Pin connected to Burg stick for easy accessibility.
- LED Status indicators to indicate the relay ON/OFF status.
- Mounting holes provided.
₹370.00 Excl. GST 18% -
650nm 6mm 50mW 5V Red Laser Diode
- Output Power: 50mW.
- Working Voltage: 5V DC.
- Operating current: <30mA.
- Housing material: Copper.
- Laser beam Size: <φ8mm ( @15 m )
- Working temperature: -10C ~ 40C
- Laser wavelength: 650nm red-colored.
- Working life: more than 2000 hours.
- Spot mode: Dot Facula (continuous output).
- Power lead length: 80mm.
₹49.00 Excl. GST 18% -
650nm 6mm 5mW 5V Red Laser Diode
- Output Power: 5mW.
- Working Voltage: 3V to 5V DC.
- Operating current: <40mA.
- Housing material: Copper.
- Laser beam Size: <φ8mm ( @15 m )
- Working temperature: -10°C ~ 40°C
- Laser wavelength: 650nm red-colored.
- Working life: more than 2000 hours.
- Spot mode: Dot Facula (continuous output).
- Power lead length: 80mm.
₹49.00 Excl. GST 18% -
8 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A 250VAC / 10A 30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection.
- Freewheeling diode to protect your microcontroller.
- Input Signal Pin connected to Burg stick for easy accessibility.
- LED Status indicators to indicate the relay ON/OFF status.
- Mounting holes provided.
₹370.00 Excl. GST 18% -
8 Channel 5V Relay Module
- The 8550 transistor drive, driveability.
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
₹360.00 Excl. GST 18% -
8mm LDR Light Dependent Resistor
- Diameter: 8mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +800°C (Approx.)
- Dark Resistance: 1-20 Mohm
₹21.00 Excl. GST 18% -
Acrylic Case For XH-W1209 Temperature Control Module
- Good Quality Material
- Crystal Clear
- Weight: 25g
- Dimensions (LxWxH)mm: 59 x 51 x 18.
₹65.00 Excl. GST 18% -
Alcohol Sensor MQ303A
- Used to measure or detect Alcohol
- Can be used as a digital or analog sensor
- Long life and low cost
- Simple drive circuit
- High sensitivity
₹245.00 Excl. GST 18% -
Aluminium Heat sink for High Power LED Amplifier (100 x 40 x 8 mm)
- No. of blade: 26
- Colour: Silver
- Material: Aluminum
- Blade thickness: 1mm
- Base plate thickness: 2mm
- Dimensions: 100 x 40 x 8mm
₹149.00 Excl. GST 18% -
Aluminium Heat Sink for LED Amplifier Chip IC (150 x 60 x 25 mm)
- Quantity of blade: 24
- Color: Silver
- Material: Aluminum
- Blade thickness: 1mm
- Base plate thickness: 2mm
- Dimensions: 150 x 60 x 25mm
₹253.00 Excl. GST 18% -
AVR ISP 10 Pin to 6 Pin Adapter Board
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side:Â 6.
- Connector type on USBASP side:Â Male.
- Connector type on Device under programming side:Â Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
₹60.00 Excl. GST 18% -
BFD-1000 Five Channel Infrared Tracking Module Tracing Sensor
- Input voltage: 3.0V – 5.5V
- Output form: digital output (high and low level)
- Detection distance: 0 – 4 cm (black and white line sensors)
- 0–5 cm (adjustable distance detection)
₹205.00 Excl. GST 18% -
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
- Rated Voltage: 250V
- Current: 5A
- Temperature: 80° C
- Cable Length: 73 mm
- Head Dimension: 20 x 8 x 4 (LxWxH) mm
- Mechanical making and breaking of electrical circuits.
- Easy to use, small and handy module.
- Acts as temperature operated circuit breaker.
₹98.00 Excl. GST 18% -
Bracket for PIR Motion Detector Sensor Module HC-SR501
- Material: Acrylic.
- Dimensions: 50 x 40 x 18 (LxWxH) mm.
- Weight: 8 gm.
₹47.00 Excl. GST 18% -
Capacitive Soil Moisture Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Analog output.
- Supports 3-Pin Gravity Sensor interface
- Dimensions mm(LxWxH): 98 x 23 x 4.
₹120.00 Excl. GST 18% -
Case for RA169 HIFI DAC+ Sound Card
- High-Quality Acrylic Case.
- Easy To Assemble.
- Has All Cut Outs.
- Provides Protection To DAC As Well As Raspberry Pi.
₹236.00 Excl. GST 18%
Shop By Department
- Boards & Programmers
- Drone Parts
- Electronic Components
- Basic Electronic Components
- Buttons & Switches
- Buzzer & Speaker
- Connectors
- Breadboard and Zero PCBs
- Microcontroller ICs
- Semiconductor ICs
- Indicator and Displays
- Instruments & Tools
- Power Supply
- Robotics
- Sensors & Modules
- Modules
- Sensors
- Accelerometers
- Color Sensors
- Distance Sensors
- ECG, Pulse & Heart Beat Sensors
- Flex Sensors
- Gas Sensors
- Hall Sensors
- LDR & Light Sensors
- Load Cell Weight Sensor
- Magnetic Sensors
- IR and PIR Sensors
- Pressure Sensors
- Soil Moisture & PH Sensors
- Sound Sensors
- Temperature & Humidity Sensors
- Touch Sensors
- Water Flow & Rain Drop Sensors
- Wires and Cables
- 3D Printers and Parts
