-
5V 2 channel USB PC Intelligent Control Relay Module
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production
₹365.00 Excl. GST 18% -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹145.00 Excl. GST 18% -
2 Channel 5V Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage: 3.3V – 5V
- Back EMF protection
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max. 10A
- DC Control Voltage: 30V @max. 10A
₹85.00 Excl. GST 18% -
1 Channel 12V Relay Module
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay: 15A 125V AC or 10A 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
₹65.00 Excl. GST 18% -
8 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A 250VAC / 10A 30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection.
- Freewheeling diode to protect your microcontroller.
- Input Signal Pin connected to Burg stick for easy accessibility.
- LED Status indicators to indicate the relay ON/OFF status.
- Mounting holes provided.
₹370.00 Excl. GST 18% -
4 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC.
- Equipped with high-current relay 10A 250VAC / 10A 30VDC.
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection.
- Freewheeling diode to protect your microcontroller.
- Input Signal Pin connected to Burg stick for easy accessibility.
- LED Status indicators to indicate the relay ON/OFF status.
- Mounting holes provided.
₹185.00 Excl. GST 18% -
1 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC.
- Equipped with high-current relay 10A 250VAC / 10A 30VDC.
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection.
- Freewheeling diode to protect your microcontroller.
- Input Signal Pin connected to Burg stick for easy accessibility.
- LED Status indicators to indicate the relay ON/OFF status.
- Mounting holes provided.
₹112.00 Excl. GST 18%
Shop By Department
- Boards & Programmers
- Drone Parts
- Electronic Components
- Basic Electronic Components
- Buttons & Switches
- Buzzer & Speaker
- Connectors
- Breadboard and Zero PCBs
- Microcontroller ICs
- Semiconductor ICs
- Indicator and Displays
- Instruments & Tools
- Power Supply
- Robotics
- Sensors & Modules
- Modules
- Sensors
- Accelerometers
- Color Sensors
- Distance Sensors
- ECG, Pulse & Heart Beat Sensors
- Flex Sensors
- Gas Sensors
- Hall Sensors
- LDR & Light Sensors
- Load Cell Weight Sensor
- Magnetic Sensors
- IR and PIR Sensors
- Pressure Sensors
- Soil Moisture & PH Sensors
- Sound Sensors
- Temperature & Humidity Sensors
- Touch Sensors
- Water Flow & Rain Drop Sensors
- Wires and Cables
- 3D Printers and Parts
