MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module

MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). It is based on I2C Address, Address: 0x68 by default, 0x69 if AD0 is pulled high.

The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.

Features:

• Acceleration, Gyroscope, and Magnetometer
• 9 DOF modules (three-axis gyroscope + triaxial accelerometer and three-axis magnetic field + atmospheric pressure).
• Build in ultra low noise linear LDO voltage regulator.
• Built-in onboard filters, which reduce noise from the motor and other high current electronics.
• All sensors connected to the I2C bus.
• Build in Logic level converter for I2C.
• Power indicator LED.
• Using Immersion Gold PCB, machine welding process to ensure quality.

Specifications:

• Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
• Three 16-bit ADCs for digitizing the accelerometer outputs
• Three 16-bit ADCs for digitizing the magnetometer outputs
• Gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps)
• Accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g
• Magnetometer full-scale range of ±4800μT
• I2C and SPI serial interfaces
• Power supply: 3-5v

Applications:

• FPV, RC and Robots systems
• GPS navigation systems
• Impact recognition and logging
• Gaming and virtual reality input devices
• Motion-activated functions
• Intelligent power saving for handheld devices
• Vibration monitoring and compensation
• Free-fall detection
• 6D-orientation detection

Package Includes:

• 1 x MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module.
• 1 x Jumper Header( Unsoldered).

*Product Images are shown for illustrative purposes only and may differ from actual product.